|
 |
Image Series continuous
hinge single swing door (IMST) |
 |
Image Series door with in-line
panel (IMST-I) |
 |
Image Series door with 90°
panel (IMST-90-34) |
 |
Image Series door with in-line
panel and 90 ° panel (IMST-90-38/48) |
 |
Image Series Neo Angle shower
door (IMST-135) |
 |
Image Tub Slider (IMT) |
 |
Image Tub Slider with in-line
panel (IMT-1) |
 |
Image Tub Slider with 90°
return panel (IMT-3) |
 |
Image Shower Slider (IMS) |
|
Image Shower Slider with
in-line panel (IMS-1) |
| |
Image Shower Slider with
90° return panel (IMS-3) |
 |
Elite Tub Slider (ELT) |
 |
Elite Tub Slider with in-line panel (ELT-1) |
 |
Elite Tub Slider with 90° panel (ELS-3) |
 |
Elite Shower Slider (ELS) |
|
Elite Shower Slider with in-line panel (ELS-1) |
|
Elite Shower Slider with 90° panel (ELS-3) |
| A. |
All bright-dipped metal is extruded using
prime 6463 billet in temper T-5 with the exception of
the swing door hinge rails, which are 6463 T-6. Powder-coated
and satin units may be extruded using either 6463 or 6063
alloy metal with the same temper as is used for anodized
material. All exposed screws or fasteners are stainless
steel to prevent rust or corrosion. |
| B. |
All glass shall be 3/8" or 1/2"
thick for Geneva, Zurich, and Prima Series. All operable
glass panels shall be 3/8" thick and all stationary
panels shall be 3/16" thick for Elite Series. |
| C. |
All hinges on heavy glass products are constructed
of #320 stainless steel (Zurich) or solid brass (Prima,
Geneva), with bushings, gaskets and screws necessary for
attaching hinges to holes or notch provided in glass. |
| D. |
All extruded vinyl shall provide a watertight
and/or steam seal and shall be applied to exposed edges
of glass where appropriate. |
| E. |
All panels shall be 3/16" or 1/4"
thick for Master, Image, and Premier Series. |
| A. |
A. All Euroview enclosures shall be installed
in a true and workmanlike manner, consistent with current
manufacturer's guidelines and instructions. |
| B. |
B. Installer is responsible for testing
and adjustment to ensure that the door operates smoothly.
|
| C. |
C. Installer is responsible for general
debris removal on all glass surfaces and the jobsite following
installation.
|
|
|
