- Resources
Measuring Guide
When looking to purchase a Euroview glass enclosure, get a quote, or simply planning that dream bathroom, it's important to accurately tell us your needs. Use the measuring guide below to help you. If you're unsure about your specific configuration, please contact us. Remember, Euroview offers its professional factory installation service to measure and install your enclosure.
How to Measure
- All dimensions are to be taken after wall coverings are
installed.
- Indicate desired unit heights, i.e., to line up with
a grout line or tile accent line. (Refer to Euroview catalog
for standard heights)
- Indicate if there are any moldings, etc., which project
out into the opening and would require that the glass be
notched.
- All dimensions are to be taken at centerline of shower
base or tub threshold.
- Note if any fixtures, etc., are in front of the unit,
which may inhibit door swing. If so, indicate location.
- The threshold of the shower base or tub should pitch
into the shower or tub, so that water does not collect in
these areas. This also applies to any seats or shelves built
inside the enclosure.
- If the opening is level and plumb the dimensions at each
side and top and bottom should be equal. If otherwise, indicate
which sides are out of plumb and by what dimension.
Recessed Tub Enclosure |
Neo Angle Shower Unit 
|
|
Recessed Shower Enclosure 
|
90° Corner Shower Unit w/Buttress Panel 
|
|
90° Corner Shower Unit 
|
90° Corner Tub Unit 
|
